Partial Sample Specification

1.01 SECTION INCLUDES

A. Water cleaning of brick and limestone surfaces.

B. Replacement of brick units.

C. Repointing mortar joints.

1.02 RELATED SECTIONS

A. Section 04065 - Mortar.

B. Section 04810 - Unit Masonry Assemblies: Brick masonry units.

C. Section 07622 - Sheet Copper Flashing and Trim.

1.03 REFERENCES

A. ACI 530/ASCE 5/TMS 402 - Building Code Requirements for Masonry Structures; American Concrete Institute.

B. ACI 530.1/ASCE 6/TMS 602 - Specifications for Masonry Structures; American Concrete Institute.

1.04 SUBMITTALS

A. See Section 01300 - Administrative Requirements, for submittal procedures.

B. Samples: Submit four samples of face brick units to illustrate matching color, texture and extremes of color range.

1.05 QUALITY ASSURANCE

A. Comply with provisions of ACI 530/ASCE 5/TMS 402 and ACI 530.1/ASCE 6/TMS 602, except where exceeded by requirements of the contract documents.

B. Restorer: Company specializing in masonry restoration with minimum three years of documented experience.

1.06 PRE-INSTALLATION MEETING

A. Convene one week prior to commencing work of this section.

B. Require attendance of parties directly affecting work of this section.

C. Review conditions of installation, installation procedures, and coordination with related work.

Return to Case Study